1PC reduced-bore female-thread ball valve with lever
2W-M01A
A reduced-bore one-piece ball valve with a manual lever and female-thread ends. Check the listed size and material alternatives, then specify the required thread, service conditions and quantity.
- Model / form
- 2W-M01A · 1PC lever handle
- Body construction
- One-piece investment-cast body; reduced bore
- Size range
- 1/4–4 in
- Pressure designation
- 1000 PSI WOG; allowable pressure at the required temperature TBC
- Connection
- Female × female
- Thread alternatives
- BSP / BSPT / NPT; exact standard and edition TBC for the order
- Body / cap alternatives
- CF8 / CF8M
- Ball / stem alternatives
- SS304 / SS316
- Seat options
- PTFE / RPTFE
- Gasket / packing
- PTFE
- Operation
- Manual lever handle
- Stem type
- Blow-out-proof stem as specified in the matching datasheet
- Service temperature
- TBC for the selected seat, medium and pressure
Confirm configuration, price, quantity and lead time for each enquiry.
Some service conditions or material combinations require confirmation. Provide the medium, working temperature and pressure; order against the final technical confirmation.
Dimensions
Units: Size: inch; L/d/H/W: mm as printed in the source
| Size | L（mm） | d（mm） | H（mm） | W（mm） |
|---|---|---|---|---|
| 1/4" | 42 | 5 | 26.5 | 71 |
| 3/8" | 46.5 | 7 | 29 | 75 |
| 1/2" | 53 | 9 | 35 | 91 |
| 3/4" | 56.5 | 12 | 40 | 95 |
| 1" | 67 | 15 | 44 | 105 |
| 1-1/4" | 75 | 20 | 58 | 119 |
| 1-1/2" | 80.5 | 25 | 62 | 132 |
| 2" | 93 | 32 | 67 | 138 |
| 2-1/2" | 122 | 38 | 85 | 192 |
| 3" | 132 | 50 | 96 | 220 |
| 4" | 184 | 65 | 122 | 250 |
Model 2W-M01A only. L/d/H/W are the source dimension symbols; size is nominal inches. Dimensions are not transferred from another model. Confirm the mating thread and current approved drawing before order.
Main parts and listed material alternatives
| No. | Part | Material alternatives |
|---|---|---|
| 1 | Body | CF8/CF8M |
| 2 | Ball | SS304/SS316 |
| 3 | Seat | PTFE/RPTFE |
| 4 | Washer | SS304/SS316 |
| 5 | Bonnet | CF8/CF8M |
| 6 | Stem | SS304/SS316 |
| 7 | Gasket | PTFE |
| 8 | Packing | PTFE |
| 9 | Gland Nut | SS304/SS316 |
| 10 | Handle | SS201/SS304 |
| 11 | Nut | SS304 |
Slash-separated materials are listed alternatives. Confirm the ordered bill of materials; the photograph does not certify every alternative or an arbitrary combination.
Selection questions
Which dimensions apply to this valve?
Use the 2W-M01A table on this page. Other handle types have their own dimensions.
What information should I include in my enquiry?
Specify the model, size, body and trim material, thread, medium, pressure, temperature, quantity and destination.
Specifications compiled from available product documents。Dimensions, performance and suitability are subject to confirmed drawings and ordering documents.
← Back to Ball Valves range